Ceramic Brass Fitting Code — 1 SB-05 (03H 02H 01H )
1- VALVE BODY (BONNET) +
ITEM CODE :03 H
QTY. USED : 1
MATERIAL : CuZn40Pb2
2- SPINDLE +
ITEM CODE : 02H
QTY. USED : 1
MATERIAL : CuZn40Pb2
3- SPINDLE- O RING +
ITEM CODE :OR-02
QTY. USED : 1
MATERIAL : NBR
4- SPINDLE- O RING +
ITEM CODE : OR-02
QTY. USED : 1
MATERIAL : NBR
5- W LOCK +
ITEM CODE : WL-01
QTY. USED : 1
MATERIAL : SS 304
6- SHEET WASHER +
ITEM CODE : STW-01
QTY. USED : 1
MATERIAL : NBR 2580BK
7- VALVE +
ITEM CODE :01H
QTY. USED : 1
MATERIAL : CuZn40Pb2
8- VALVE -O RING +
ITEM CODE : OR-08
QTY. USED : 1
MATERIAL : NBR
9- DOOM NUT +
ITEM CODE : DN-01
QTY. USED : 1
MATERIAL : CuZn40Pb2
10- MOHRA O RING +
ITEM CODE : 0R-16
QTY. USED : 1
MATERIAL : NBR
LIFE TEST +
350,000 Open and Close cycles
SEALING TEST +
Static pressure 0.8Mpa , Holding time 60sec , No deformation, No leakage
FLOW RATE TEST +
The rate is tested under 0.3Mpa and The average flow rate 17L /Min
LEVER TESQUE TEST +
Left & Right torque test, When Static 0.08 – 0.18 N.M
BREAK TORQUE TEST +
≥ 15 N.M
BRUST TEST PRESSURE +
Static water pressure max.3.5Mpa
MAX.TURNING ANGLE +
180 deg.
The Faucet Brass Valve, made available in the market by us, is manufactured as per the industrial guidelines, using the best quality raw materials that are available. The offered products are used with faucets to increase the performance. Owing to its reasonable price and quality, which is never compromised, this product is highly asked for in the market. The raw materials used in its making, makes it a product with high resistant to corrosion and dimensionally accurate.